ஒத்த வளங்கள்: Effect of edge radius and friction parameter in thermomechanical modeling of turning process /
- Siliconizing Process On Mild Steel Substrate by Using Tronoh Silica Sand: Microstructure, composition and coating growth /
- Effect of Nitriding on the Suppression of Iron Silicide Formation in Diffusion Bonded Sialon to AISI 420 /
- Wear study of Mg-SiCp reinforcement aluminium metal matrix composite /
- Tool Life Improvement of AISI 316L Stainless Steel Using Oxyacetylene Flame as Heat Source in Hot Machining /
- Detection of defects on weld bead through the wavelet analysis of the acquired arc sound signal /
- To Investigate Parameter Effects on MRR in PMEDM /
தலைப்பு: Mechanical engineering
- POSTGRADUATE SYMPOSIUM Department of Mechanical Engineering : Semester : September 2012.
- POSTGRADUATE SYMPOSIUM : Department of Mechanical Engineering, Semester : January 2012.
- POSTGRADUATE SYMPOSIUM, Department of Mechanical Engineering : Semester : May 2012. Volume 1.
- MECHANICAL WORKSHOP PRACTICE.
- Yong EV3 xue jian yi ji xie = LEARN SIMPLE MECHANICAL USING EV3 /
- JOURNAL OF BIANNUAL POSTGRADUATE CONFERENCE /
தலைப்பு: Metals
- A review of TiO2 nanotube arrays for hydrogen sensing application /
- MSS 4481 (B) [Petua menghasilkan logam, membuat perhiasan dan menjaga barang logam]
- DEVELOPMENT OF A PRE-FIRED MATERIAL FOR COEFFICIENT OF THERMAL EXPANSION IMPROVEMENT /
- Siliconizing Process On Mild Steel Substrate by Using Tronoh Silica Sand: Microstructure, composition and coating growth /
- Effect of edge radius and friction parameter in thermomechanical modeling of turning process /
- Research in materials and mineral resources engineering : past, present and future : [proceedings of] first Colloquium On Post-Graduate Research, Ipoh, Perak, Malaysia, 25 November 2000 /
ஆசிரியர்: Wan Masrurah Hairudin
ஆசிரியர்: Mokhtar Awang
- Utilizing H13 Tool Steel for Friction Stir Welding of Nylon-6 /
- Magnetic Field Abberation on Pipe Induced by Hydrostatic Pressure /
- The Hardness Variation Due to Secondary Heating in Friction Stir Welding of Small Diameter Aluminium Alloy 6063 Pipe /
- Effect of Nitriding on the Suppression of Iron Silicide Formation in Diffusion Bonded Sialon to AISI 420 /
- Effect of edge radius and friction parameter in thermomechanical modeling of turning process /
- AUTO-REINFORCEMAGNETIC FLYWHEEL: “REINVENTING THE FLYWHEEL DEVICE BYRETROFITTING WITH DUAL LAYER DISCS AND SUBSTITUTING WITH PERMANENT MAGNETS”/