Surface hardness of friction stir welded AA6063 pipe

by Ismail, A., Awang, M.
Published 2014
Institution: Universiti Teknologi Petronas

Developing a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW) Using Hyperworks

by Meyghani, B., Awang, M.
Published 2020
Institution: Universiti Teknologi Petronas

Effect of low temperature CO2 injection in high temperature oil reservoirs using slimtube experiment

by Hamdi, Z., Awang, M.
Published 2016
Institution: Universiti Teknologi Petronas

Investigation of carbon nanotube defects on its strength using nonlinear finite element modeling

by Mohammadpour, E., Awang, M.
Published 2014
Institution: Universiti Teknologi Petronas

Introducing new slug size method in water alternating CO2 for enhanced oil recovery

by Hamdi, Z., Awang, M.
Published 2014
Institution: Universiti Teknologi Petronas

Non-linear multi-scale finite element method for prediction of tensile behaviour of carbon nanotube-reinforced polymer composites Nelinearna, višeskalna metoda kona�nih elemenata...

by Mohammadpour, E., Awang, M.
Published 2013
Institution: Universiti Teknologi Petronas

Auto-reinforce magnetic flywheel as recent advancement of automobile flywheel

by Akbar, A.R., Awang, M.
Published 2014
Institution: Universiti Teknologi Petronas

A comparative study of finite element analysis for friction stir welding application

by Meyghani, B., Awang, M., Emamian, S.
Published 2016
Institution: Universiti Teknologi Petronas

A comparative study of finite element analysis for friction stir welding application

by Meyghani, B., Awang, M., Emamian, S.
Published 2016
Institution: Universiti Teknologi Petronas

A novel tool path strategy for modelling complicated perpendicular curved movements

by Meyghani, B., Awang, M.B.
Published 2019
Institution: Universiti Teknologi Petronas

Performance prediction of inertial auto-reinforce magnetic flywheel energy storage device using finite element magnetic modeling

by Akbar, A.R., Awang, M.
Published 2014
Institution: Universiti Teknologi Petronas

A mathematical formulation for calculating temperature dependent friction coefficient values: Application in friction stir welding (FSW)

by Meyghani, B., Awang, M., Emamian, S.
Published 2017
Institution: Universiti Teknologi Petronas

Heat transfer in the formation

by Moradi, B., Awang, M.B.
Published 2013
Institution: Universiti Teknologi Petronas

Gibbs excess energy model to predict phase behaviour of brine/oil/surfactant mixtures for Chemical Enhanced Oil Recovery CEOR methods

by Adeeyo, Y.A., Awang, M.B.
Published 2016
Institution: Universiti Teknologi Petronas

Evaluating liquid CO2 injection technique for oil recovery using core flood experiments

by Hamdi, Z., Awang, M., Zamani, A.
Published 2016
Institution: Universiti Teknologi Petronas

Evaluation of miscible CO2-flooding to improve oil recovery in a clastic heterogeneous reservoir

by Al-Khazraji, A.K., Awang, M.B.
Published 2016
Institution: Universiti Teknologi Petronas

Modification of Ramey's model for carbon dioxide injection in the vicinity of critical point

by Moradi, B., Ayoub, M., Awang, M.
Published 2016
Institution: Universiti Teknologi Petronas

Overview of underwater friction stir welding

by Noor, N.F.M., Awang, M.
Published 2016
Institution: Universiti Teknologi Petronas

Prediction of the Temperature Behaviour During Friction Stir Welding (FSW) Using Hyperworks®

by Meyghani, B., Awang, M.B., Teimouri, R.
Published 2021
Institution: Universiti Teknologi Petronas

Preface

by Awang, M., Fared, M.R.M.M.
Published 2020
Institution: Universiti Teknologi Petronas