Finite element analysis of stress variation along the depth of gear tooth

by Karuppanan, S., Patil, S.S.
Published 2016
Institution: Universiti Teknologi Petronas

Residual strength analysis of pipeline with circumferential groove corrosion subjected to internal pressure

by Arumugam, T., Karuppanan, S., Ovinis, M.
Published 2019
Institution: Universiti Teknologi Petronas

Finite element analyses of corroded pipeline with single defect subjected to internal pressure and axial compressive stress

by Arumugam, T., Karuppanan, S., Ovinis, M.
Published 2020
Institution: Universiti Teknologi Petronas

Modeling and Simulation of PMSG Wind Energy Conversion System Using Active Disturbance Rejection Control

by Sadeq, S., Ovinis, M., Karuppanan, S.
Published 2022
Institution: Universiti Teknologi Petronas

Buckling Strength of Corroded Pipelines with Interacting Corrosion Defects: Numerical Analysis

by Kuppusamy, C.S., Karuppanan, S., Patil, S.S.
Published 2016
Institution: Universiti Teknologi Petronas

Experimental measurement of strain and stress state at the contacting helical gear pairs

by Patil, S.S., Karuppanan, S., Atanasovska, I.
Published 2016
Institution: Universiti Teknologi Petronas

Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle

by Patil, S.S., Karuppanan, S., Atanasovska, I.
Published 2015
Institution: Universiti Teknologi Petronas

Experimental measurement of strain and stress state at the contacting helical gear pairs

by Patil, S.S., Karuppanan, S., Atanasovska, I.
Published 2016
Institution: Universiti Teknologi Petronas

A review of surface deformation and strain measurement using two-dimensional digital image correlation

by Khoo, S.-W., Karuppanan, S., Tan, C.-S.
Published 2016
Institution: Universiti Teknologi Petronas

Numerical analysis of low-velocity impact of carbon-basalt/epoxy hybrid laminates

by Maper, A., Karuppanan, S., Patil, S.S.
Published 2019
Institution: Universiti Teknologi Petronas

Analysis and formulation of spur gear stresses with different tip modifications ��齿�修正��齿轮�����计�...

by Maper, A., Karuppanan, S., Patil, S.S.
Published 2019
Institution: Universiti Teknologi Petronas

A short review on frictional contact stress distribution in involute gears

by Patil, S.S., Karuppanan, S., Atanasovska, I.
Published 2019
Institution: Universiti Teknologi Petronas

Failure pressure prediction of a corroded pipeline with longitudinally interacting corrosion defects subjected to combined loadings using fem and ann

by Lo, M., Karuppanan, S., Ovinis, M.
Published 2021
Institution: Universiti Teknologi Petronas

Burst strength analysis of thin composite pressure vessels

by Afrathim, A., Karuppanan, S., Patil, S.S.
Published 2021
Institution: Universiti Teknologi Petronas

Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle

by Patil, S.S., Karuppanan, S., Atanasovska, I.
Published 2015
Institution: Universiti Teknologi Petronas

Contact pressure evaluation of a gear pair along the line of action using finite element analysis

by Patil, S., Karuppanan, S., Abdul Wahab, A.
Published 2013
Institution: Universiti Teknologi Petronas

ANN-and FEA-Based Assessment Equation for a Corroded Pipeline with a Single Corrosion Defect

by Lo, M., Karuppanan, S., Ovinis, M.
Published 2022
Institution: Universiti Teknologi Petronas

Basalt carbon hybrid composite for wind turbine rotor blades: A short review

by Mengal, A.N., Karuppanan, S., Wahab, A.A.
Published 2014
Institution: Universiti Teknologi Petronas

Modal analysis of a centrifugal pump impeller using finite element method

by Ashri, M., Karuppanan, S., Patil, S., Ibrahim, I.
Published 2014
Institution: Universiti Teknologi Petronas

Structural analysis of basalt fiber reinforced plastic wind turbine blade

by Mengal, A.N., Karuppanan, S., Wahab, A.A.
Published 2014
Institution: Universiti Teknologi Petronas