A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application

by Akhtar, S., Kurnia, J.C., Shamim, T.
Published 2015
Institution: Universiti Teknologi Petronas

A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application

by Akhtar, S., Kurnia, J.C., Shamim, T.
Published 2015
Institution: Universiti Teknologi Petronas

Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge

by Kurnia, J.C., Sasmito, A.P.
Published 2019
Institution: Universiti Teknologi Petronas

Advances in proton exchange membrane fuel cell with dead-end anode operation: A review

by Kurnia, J.C., Sasmito, A.P., Shamim, T.
Published 2019
Institution: Universiti Teknologi Petronas

Heat transfer performance of non-circular coiled tubes - research summary, challenges and directions

by Kurnia, J.C., Sasmito, A.P.
Published 2016
Institution: Universiti Teknologi Petronas

Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge

by Kurnia, J.C., Sasmito, A.P.
Published 2019
Institution: Universiti Teknologi Petronas

Application of phase change material-based thermal capacitor in double tube heat exchanger�A numerical investigation

by Fong, M., Kurnia, J., Sasmito, A.P.
Published 2020
Institution: Universiti Teknologi Petronas

Numerical investigation of phase change materials thermal capacitor for pipe flow

by Kurnia, J.C., Sasmito, A.P.
Published 2017
Institution: Universiti Teknologi Petronas

Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions

by Kurnia, J.C., Sasmito, A.P., Shamim, T.
Published 2017
Institution: Universiti Teknologi Petronas

Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge

by Kurnia, J.C., Sasmito, A.P.
Published 2019
Institution: Universiti Teknologi Petronas

Application of phase change material-based thermal capacitor in double tube heat exchanger�A numerical investigation

by Fong, M., Kurnia, J., Sasmito, A.P.
Published 2020
Institution: Universiti Teknologi Petronas

Performance Evaluation of Liquid Mixing in a T-Junction Passive Micromixer with a Twisted Tape Insert

by Kurnia, J.C., Sasmito, A.P.
Published 2020
Institution: Universiti Teknologi Petronas

Numerical Investigation of Boiling Flow in Oval Tube with Different Ellipticity

by Liaw, K.L., Kurnia, J.C.
Published 2022
Institution: Universiti Teknologi Petronas

Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application

by Kurnia, J.C., Sasmito, A.P., Mujumdar, A.S.
Published 2016
Institution: Universiti Teknologi Petronas

Prediction of air flow, methane, and coal dust dispersion in a room and pillar mining face

by Yueze, L., Akhtar, S., Sasmito, A.P., Kurnia, J.C.
Published 2017
Institution: Universiti Teknologi Petronas

Performance and potential energy saving of thermal dryer with intermittent impinging jet

by Kurnia, J.C., Sasmito, A.P., Xu, P., Mujumdar, A.S.
Published 2017
Institution: Universiti Teknologi Petronas

Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application

by Kurnia, J.C., Sasmito, A.P., Mujumdar, A.S.
Published 2016
Institution: Universiti Teknologi Petronas

Computational evaluation of thermal management strategies in an underground mine

by Sasmito, A.P., Kurnia, J.C., Birgersson, E., Mujumdar, A.S.
Published 2015
Institution: Universiti Teknologi Petronas

Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections

by Kurnia, J.C., Sasmito, A.P., Shamim, T., Mujumdar, A.S.
Published 2016
Institution: Universiti Teknologi Petronas

Numerical Investigation of Electronic Cooling with Phase Change Material

by Medhi, N.S., Haryoko, L.A.F., Kurnia, J.C.
Published 2021
Institution: Universiti Teknologi Petronas