Rheological behavior of carbon nanotubes/copper feedstocks for metal injection molding

Metal injection molding (MIM) technology is known for its ability of producing near net shape components. This study presents the results of flow behavior of multi-walled carbon nanotubes (MWCNTs) reinforced copper composites mixes. The solid loadings in the copper mixes were investigated in the...

Full description

Main Author:	., Faiz Ahmad, Ali Samer Muhsan, M Rafi Raza
Format:	Article
Institution:	Universiti Teknologi Petronas
Record Id / ISBN-0:	utp-eprints.12109 /
Published:	2012
Subjects:	T Technology (General)
Online Access:	https://www.scientific.net/AMR.403-408.5335 http://eprints.utp.edu.my/12109/
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2015)

Flow behavior of Cu/CNTs feedstocks for powder injection molding
by: ., li Samer Muhsan, Faiz Ahmad, Norani Muti Mohamed, M Rafi Raza
Published: (2011)

Uniform dispersion of multiwalled carbon nanotubes in copper matrix nanocomposites using metal injection molding technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2013)

Carbon Nanotubes Reinforced Copper Matrix Nanocomposites via Metal Injection Molding Technique
by: ., Ali S Muhsan, Faiz Ahmad, Norani M Mohamed, Putri SMBTM Yusoff,
Published: (2012)

Orientation of Carbon Fibers in Copper matrix Produced by Powder Injection Molding
by: ., M Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, MA Omer,
Published: (2014)

Nanoscale dispersion of carbon nanotubes in copper matrix nanocomposites for thermal management applications
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2013)

Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding
by: ., Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, M Aslam
Published: (2015)

PREPARATION AND FIBER FRACTURE OF METAL MATRIX COMPOSITE FEED-STOCK FOR POWDER INJECTION MOLDING.
by: ., Faiz Ahmad, Muhammad Rafi Raza, Ali Samer Muhsan, Mohd Afian Ome
Published: (2013)

Flow properties of Cu/CNTs feedstocks
by: ., Ali Samer Muhsan, Faiz Ahmad, M Rafi Raza
Published: (2011)

Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites
by: ., Faiz Ahmad, Muhammad Aslam, M Rafi Raza, Ali S Muhsan
Published: (2014)

Development of defects free stainless steel parts using powder injection molding
by: Muhammad Rafi Raza, Faiz Ahmad, M.A Omar, Ali S. Muhsan,
Published: (2017)

Fabrication and Microstructural Analysis of CNTs Reinforced Copper Matrix Nanocomposites via MIM Technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2013)

Homogeneous Distribution of Carbon Nanotubes in Copper Matrix Nanocomposites Fabricated via Combined Technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M. Mohamed, Puteri Sri Melo
Published: (2014)

Role of debinding to control mechanical properties of powder injection molded 316L stainless steel
by: ., Muhammad Rafi Raza, Faiz Ahmad, MA Omar, RM German, Ali S Muhsan
Published: (2013)

Defect Analysis of 316LSS during the Powder Injection Moulding Process
by: ., M Rafi Raza, Faiz Ahmad, MA Omar, RM German, Ali S Muhsan
Published: (2012)

Orientation of carbon fibers in copper matrix produced by powder injection molding
by: Irfan Shirazi, M., et al.
Published: (2014)

Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks
by: Aslam, M., et al.
Published: (2016)

Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites
by: Muhsan, A.S., et al.
Published: (2015)

Influence of powder loading on rheology and injection molding of Fe-50Ni feedstocks
by: Ali, M., et al.
Published: (2020)

Development of nanocomposites heat sink (MWCNTs/Cu) using powder injection moulding for electronic applications
by: ., Ali S Muhsan, Faiz Ahmad
Published: (2011)

Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding
by: Shirazi, I., et al.
Published: (2015)

EFFECTS OF SINTERING PARAMETERS ON THE MICROSTRUCTURAL CHARACTERISTICS OF CU/CNTS NANOCOMPOSITES
by: Ali Samer Muhsan, Norani M Mohamed, Faiz Ahmad, Thar M Badri Alb,
Published: (2016)

Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2014)

Experimental Preparation and Numerical Simulation of High Thermal Conductive Cu/CNTs Nanocomposites
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2014)

Effects of residual carbon on microstructure and surface roughness of PIM 316L stainless steel
by: ., Muhammad Rafi Raza, Faiz Ahmad, Norhamidi Muhamad, Abu Bakar Sul
Published: (2015)

A Numerical Analysis for Predicting the Thermal Conductivity of Carbon Nanotube Reinforced Copper-Matrix Nanocomposites
by: ., Iman Eslami Afrooz, Puteri Sri Melor Binti Megat Yusoff, Faiz Ah
Published: (2014)

MICROLECTURE/LAB HYBRID CLASS FOR BRIDGING THE GAP BETWEEN THEORIES AND APPLICATIONS IN TEACHING ENGINEERING SUBJECTS
by: Muhsan, Ali Samer
Published: (2019)

Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles
by: ., Ali Samer, Malek Ali, Projjal Basu, Faiz Ahmad
Published: (2013)

Nano Additives in Water Based Drilling Fluid for Enhanced-Performance Fluid-Loss-Control
by: ., Ali Samer Muhsan, Norani M Mohamed, Usman Siddiqui, Muhammad U S
Published: (2017)

Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique
by: Muhsan, A.S., et al.
Published: (2014)

Developments of Al-12Si alloys by reinforcing TiN particles
by: ., Malek Ali, Ali Samer Muhsan, MI Fadhel, MA Alghoul, K Sopian, A
Published: (2012)

FIBER ORIENTATION IN METAL INJECTION MOLDED SHORT CARBON FIBER REINFORCED COPPER MATRIX COMPOSITE
by: SHIRAZI, MUHAMMAD IRFAN
Published: (2014)

Low pressure injection molding of boron admixed 316l stainless steel for engineering applications
by: Aslam, M., et al.
Published: (2016)

Carbon Dioxide Injection and Asphaltene Precipitation in Light Oil Reservoirs
by: Alta'ee, Ali F., et al.
Published: (2010)

Powder injection molded nano copper oxide grafted graphene reinforced copper matrix composites
by: Naseer, A., et al.
Published: (2022)

The effect of Skin Factor On Water Injectivity during WAG process
by: Hamid, Mohamed Ali, et al.
Published: (2010)

A numerical analysis for predicting the thermal conductivity of carbon nanotube reinforced copper-matrix nanocomposites
by: Afrooza, I.E., et al.
Published: (2014)

Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites
by: Ahmad, F., et al.
Published: (2015)

Performance analysis of enhanced 3D printed polymer molds for metal injection molding process
by: Altaf, K., et al.
Published: (2018)

Performance analysis of enhanced 3D printed polymer molds for metal injection molding process
by: Altaf, K., et al.
Published: (2018)