Carbon Nanotubes Reinforced Copper Matrix Nanocomposites via Metal Injection Molding Technique

New thermal management solutions are required to provide cost-effective means of dissipating heat from next generation microelectronic devices. In this paper, fabrication of heat sink nanocomposite made of copper reinforced by multiwalled carbon nanotubes up to 10 Vol.% using metal injection mold...

Full description

Main Author:	., Ali S Muhsan, Faiz Ahmad, Norani M Mohamed, Putri SMBTM Yusoff,
Format:	Article
Institution:	Universiti Teknologi Petronas
Record Id / ISBN-0:	utp-eprints.12112 /
Published:	2012
Subjects:	T Technology (General)
Online Access:	http://eprints.utp.edu.my/12112/
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Uniform dispersion of multiwalled carbon nanotubes in copper matrix nanocomposites using metal injection molding technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2013)

THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2015)

Homogeneous Distribution of Carbon Nanotubes in Copper Matrix Nanocomposites Fabricated via Combined Technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M. Mohamed, Puteri Sri Melo
Published: (2014)

Rheological behavior of carbon nanotubes/copper feedstocks for metal injection molding
by: ., Faiz Ahmad, Ali Samer Muhsan, M Rafi Raza
Published: (2012)

Fabrication and Microstructural Analysis of CNTs Reinforced Copper Matrix Nanocomposites via MIM Technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2013)

Nanoscale dispersion of carbon nanotubes in copper matrix nanocomposites for thermal management applications
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2013)

Orientation of Carbon Fibers in Copper matrix Produced by Powder Injection Molding
by: ., M Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, MA Omer,
Published: (2014)

Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites
by: ., Faiz Ahmad, Muhammad Aslam, M Rafi Raza, Ali S Muhsan
Published: (2014)

Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding
by: ., Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, M Aslam
Published: (2015)

A Numerical Analysis for Predicting the Thermal Conductivity of Carbon Nanotube Reinforced Copper-Matrix Nanocomposites
by: ., Iman Eslami Afrooz, Puteri Sri Melor Binti Megat Yusoff, Faiz Ah
Published: (2014)

Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique
by: Muhsan, A.S., et al.
Published: (2014)

Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites
by: Muhsan, A.S., et al.
Published: (2015)

PREPARATION AND FIBER FRACTURE OF METAL MATRIX COMPOSITE FEED-STOCK FOR POWDER INJECTION MOLDING.
by: ., Faiz Ahmad, Muhammad Rafi Raza, Ali Samer Muhsan, Mohd Afian Ome
Published: (2013)

Flow behavior of Cu/CNTs feedstocks for powder injection molding
by: ., li Samer Muhsan, Faiz Ahmad, Norani Muti Mohamed, M Rafi Raza
Published: (2011)

Development of defects free stainless steel parts using powder injection molding
by: Muhammad Rafi Raza, Faiz Ahmad, M.A Omar, Ali S. Muhsan,
Published: (2017)

EFFECTS OF SINTERING PARAMETERS ON THE MICROSTRUCTURAL CHARACTERISTICS OF CU/CNTS NANOCOMPOSITES
by: Ali Samer Muhsan, Norani M Mohamed, Faiz Ahmad, Thar M Badri Alb,
Published: (2016)

Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2014)

Experimental Preparation and Numerical Simulation of High Thermal Conductive Cu/CNTs Nanocomposites
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2014)

Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique
by: Muhsan, A.S., et al.
Published: (2013)

A numerical analysis for predicting the thermal conductivity of carbon nanotube reinforced copper-matrix nanocomposites
by: Afrooza, I.E., et al.
Published: (2014)

Development of nanocomposites heat sink (MWCNTs/Cu) using powder injection moulding for electronic applications
by: ., Ali S Muhsan, Faiz Ahmad
Published: (2011)

Orientation of carbon fibers in copper matrix produced by powder injection molding
by: Irfan Shirazi, M., et al.
Published: (2014)

Role of debinding to control mechanical properties of powder injection molded 316L stainless steel
by: ., Muhammad Rafi Raza, Faiz Ahmad, MA Omar, RM German, Ali S Muhsan
Published: (2013)

Defect Analysis of 316LSS during the Powder Injection Moulding Process
by: ., M Rafi Raza, Faiz Ahmad, MA Omar, RM German, Ali S Muhsan
Published: (2012)

Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding
by: Shirazi, I., et al.
Published: (2015)

FIBER ORIENTATION IN METAL INJECTION MOLDED SHORT CARBON FIBER REINFORCED COPPER MATRIX COMPOSITE
by: SHIRAZI, MUHAMMAD IRFAN
Published: (2014)

Powder injection molded nano copper oxide grafted graphene reinforced copper matrix composites
by: Naseer, A., et al.
Published: (2022)

Effect of Thermal Cycling on Thermal Conductivity of Powder Injection Moulded MWCNT Reinforced Copper Matrix Composites
by: Ahmad, F., et al.
Published: (2020)

Nano Additives in Water Based Drilling Fluid for Enhanced-Performance Fluid-Loss-Control
by: ., Ali Samer Muhsan, Norani M Mohamed, Usman Siddiqui, Muhammad U S
Published: (2017)

Flow properties of Cu/CNTs feedstocks
by: ., Ali Samer Muhsan, Faiz Ahmad, M Rafi Raza
Published: (2011)

Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites
by: Ahmad, F., et al.
Published: (2015)

Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles
by: ., Ali Samer, Malek Ali, Projjal Basu, Faiz Ahmad
Published: (2013)

Developments of Al-12Si alloys by reinforcing TiN particles
by: ., Malek Ali, Ali Samer Muhsan, MI Fadhel, MA Alghoul, K Sopian, A
Published: (2012)

Effect of Parameters on Carbon Nanotubes Grown by Floating Catalyst Chemical Vapor Deposition
by: lim, shiyi, et al.
Published: (2012)

The effect of Skin Factor On Water Injectivity during WAG process
by: Hamid, Mohamed Ali, et al.
Published: (2010)

Grafting Of Metal Oxides On Graphene Nanoplatelets For Copper Composites Via Powder Injection Molding
by: Naseer, Abqaat
Published: (2019)

Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review
by: Baig, Z., et al.
Published: (2018)

Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review
by: Baig, Z., et al.
Published: (2018)

Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review
by: Baig, Z., et al.
Published: (2018)

Performance analysis of enhanced 3D printed polymer molds for metal injection molding process
by: Altaf, K., et al.
Published: (2018)