Enhanced Dickson voltage multiplier rectenna by developing analytical model for radio frequency harvesting applications
Radio frequency (RF) energy harvesting has experienced a rapid development recently because of the increasing number of RF transmitter sources. This article illustrates a novel analytical model for the voltage multiplier rectifier at 900 MHz. The model proposes a method of deriving the output charac...
| Main Authors: | Ali, E.M., Yahaya, N.Z., Nallagownden, P., Alqasem, B.H. |
|---|---|
| Format: | Article |
| Institution: | Universiti Teknologi Petronas |
| Record Id / ISBN-0: | utp-eprints.22206 / |
| Published: |
2019
|
| Online Access: |
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85058802342&doi=10.1002%2fmmce.21657&partnerID=40&md5=75f28a7e33897fb1b17f0f7432a04afe http://eprints.utp.edu.my/22206/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: |
Radio frequency (RF) energy harvesting has experienced a rapid development recently because of the increasing number of RF transmitter sources. This article illustrates a novel analytical model for the voltage multiplier rectifier at 900 MHz. The model proposes a method of deriving the output characteristics of the rectifying circuits in terms of two main parameters; voltage and current. The design consists of seven stages of Dickson voltage multiplier rectifier. A Schottky diode HSMS 285C was used in the design. Equations for the model were developed. These equations were used to extract the values of output voltage and current. A simulation was optimized using advanced design systems. The system was correspondingly fabricated and tested for input power range of 1 � 10�5-1 � 10�1 W. Experimental results show that an output voltage of 5.45 V and current of 1.26 � 10�5 A are achieved at 10 dBm using a 10 kΩ load, achieving an efficiency of 37.82. © 2018 Wiley Periodicals, Inc. |
|---|