Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis

Magnesium (Mg) alloys have always attracted researchers for being a light weight metal and now they have also found that it can also be used in the biomedical implants because of its compatibility with human body environment especially AZ31 Mg alloy. Machining of Mg alloy is a challenge itself becau...

Full description

Main Authors: Danish, M., Ginta, T.L., Wahjoedi, B.A., Yasir, M., Alkali, A.U.
Format: Article
Institution: Universiti Teknologi Petronas
Record Id / ISBN-0: utp-eprints.25328 /
Published: Asian Research Publishing Network 2016
Online Access: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85009192363&partnerID=40&md5=0a2a4598967f335e2996f8a65503e8b8
http://eprints.utp.edu.my/25328/
Tags: Add Tag
No Tags, Be the first to tag this record!
id utp-eprints.25328
recordtype eprints
spelling utp-eprints.253282021-08-27T12:57:42Z Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis Danish, M. Ginta, T.L. Wahjoedi, B.A. Yasir, M. Alkali, A.U. Magnesium (Mg) alloys have always attracted researchers for being a light weight metal and now they have also found that it can also be used in the biomedical implants because of its compatibility with human body environment especially AZ31 Mg alloy. Machining of Mg alloy is a challenge itself because of its low melting point and ignition risks. Cryogenic machining can significantly reduce the temperature during machining. Which not only reduces the risk of ignition but also improved surface integrity of AZ31 Mg alloy. In this paper, a finite element analysis has been done to get the temperature distribution occur during the machining of Mg alloy. We have done the analysis in two different machining condition which were dry and cryogenic machining. The results have been validated from the experiments results and are found to be in good agreement. The temperature distribution at the tool surface and at the machined surface of the work piece were shown in the forms of coloured figures. Temperature distribution at the tool surface has been shown in the form of isothermal lines. In case of cryogenic machining, a notable decrease in the temperature was shown by the results. © 2006-2016 Asian Research Publishing Network (ARPN). All rights reserved. Asian Research Publishing Network 2016 Article NonPeerReviewed https://www.scopus.com/inward/record.uri?eid=2-s2.0-85009192363&partnerID=40&md5=0a2a4598967f335e2996f8a65503e8b8 Danish, M. and Ginta, T.L. and Wahjoedi, B.A. and Yasir, M. and Alkali, A.U. (2016) Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14259-14263. http://eprints.utp.edu.my/25328/
institution Universiti Teknologi Petronas
collection UTP Institutional Repository
description Magnesium (Mg) alloys have always attracted researchers for being a light weight metal and now they have also found that it can also be used in the biomedical implants because of its compatibility with human body environment especially AZ31 Mg alloy. Machining of Mg alloy is a challenge itself because of its low melting point and ignition risks. Cryogenic machining can significantly reduce the temperature during machining. Which not only reduces the risk of ignition but also improved surface integrity of AZ31 Mg alloy. In this paper, a finite element analysis has been done to get the temperature distribution occur during the machining of Mg alloy. We have done the analysis in two different machining condition which were dry and cryogenic machining. The results have been validated from the experiments results and are found to be in good agreement. The temperature distribution at the tool surface and at the machined surface of the work piece were shown in the forms of coloured figures. Temperature distribution at the tool surface has been shown in the form of isothermal lines. In case of cryogenic machining, a notable decrease in the temperature was shown by the results. © 2006-2016 Asian Research Publishing Network (ARPN). All rights reserved.
format Article
author Danish, M.
Ginta, T.L.
Wahjoedi, B.A.
Yasir, M.
Alkali, A.U.
spellingShingle Danish, M.
Ginta, T.L.
Wahjoedi, B.A.
Yasir, M.
Alkali, A.U.
Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis
author_sort Danish, M.
title Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis
title_short Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis
title_full Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis
title_fullStr Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis
title_full_unstemmed Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis
title_sort investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis
publisher Asian Research Publishing Network
publishDate 2016
url https://www.scopus.com/inward/record.uri?eid=2-s2.0-85009192363&partnerID=40&md5=0a2a4598967f335e2996f8a65503e8b8
http://eprints.utp.edu.my/25328/
_version_ 1741196956752936960
score 11.62408

Similar Items