Simulated textile dye wastewater treatment by electrochemical oxidation: application of response surface methodology (RSM)
One of the main problems linked with wastewater from textile industries is colour. Reactive dyes in industrial discharge are difficult to manage as they are not readily amenable to biological treatment. The present study employs an electrochemical method using cast iron electrodes and sodium chlorid...
| Main Author: | Isa, M.H. |
|---|---|
| Format: | Article |
| Institution: | Universiti Teknologi Petronas |
| Record Id / ISBN-0: | utp-eprints.26132 / |
| Published: |
Taylor and Francis Inc.
2015
|
| Online Access: |
https://www.scopus.com/inward/record.uri?eid=2-s2.0-84922828619&doi=10.1080%2f19443994.2013.863165&partnerID=40&md5=005dd292be659928d7bcf5005915a38b http://eprints.utp.edu.my/26132/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: |
One of the main problems linked with wastewater from textile industries is colour. Reactive dyes in industrial discharge are difficult to manage as they are not readily amenable to biological treatment. The present study employs an electrochemical method using cast iron electrodes and sodium chloride (NaCl) as electrolyte to decolourize synthetic wastewater containing reactive red dye (Cibacron Red CR). Response surface methodology was employed to assess individual and interactive effects of operational parameters; electrolyte concentration (0.6�1.0 g/l), current density (1�3 mA/cm2), reaction time (20�60 min) and initial dye concentration (20�100 mg/l) on dye degradation. The range of NaCl concentrations studied did not show any effect on dye removal indicating that the concentrations were higher than the optimum level required. Under optimum process conditions (NaCl concentration 0.6 g/l, current density 1.4 mA/cm2 and reaction time 60 min), initial dye concentration of 100 mg/l could be almost completely removed (�99). © 2013, Balaban Desalination Publications. All rights reserved. |
|---|