The Effect of Cutting Speed on the Machinability During Drilling D2 Hardened Steel
This paper describe an experimental investigation on the effect of cutting speed on difficult-to cut-material, D2 hardened steel under drilling process. 6 sets of experiments were conducted using carbide drill bits with two different drilling diameters (3mm and 6mm) and three cutting speeds (15m/min...
| Main Author: | Md Noor, Muhammad Aimran |
|---|---|
| Format: | Final Year Project |
| Language: | English |
| Institution: | Universiti Teknologi Petronas |
| Record Id / ISBN-0: | utp-utpedia.17950 / |
| Published: |
IRC
2017
|
| Subjects: | |
| Online Access: |
http://utpedia.utp.edu.my/17950/1/Muhammad%20Aimran%2818343%29%20Dissertation.pdf http://utpedia.utp.edu.my/17950/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: |
This paper describe an experimental investigation on the effect of cutting speed on difficult-to cut-material, D2 hardened steel under drilling process. 6 sets of experiments were conducted using carbide drill bits with two different drilling diameters (3mm and 6mm) and three cutting speeds (15m/min, 25m/min and 35m/min). In addition, metal removal rate, surface roughness, final diameter, tool wear and chip morphology are the expected results for the project. |
|---|