MICROLECTURE/LAB HYBRID CLASS FOR BRIDGING THE GAP BETWEEN THEORIES AND APPLICATIONS IN TEACHING ENGINEERING SUBJECTS

Main Author:	Muhsan, Ali Samer
Format:	Non-Citation Index Journal
Institution:	Universiti Teknologi Petronas
Record Id / ISBN-0:	utp-eprints.22319 /
Published:	2019
Subjects:	T Technology (General)
Online Access:	http://eprints.utp.edu.my/22319/
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Nanoscale dispersion of carbon nanotubes in copper matrix nanocomposites for thermal management applications
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2013)

Rheological behavior of carbon nanotubes/copper feedstocks for metal injection molding
by: ., Faiz Ahmad, Ali Samer Muhsan, M Rafi Raza
Published: (2012)

Nano Additives in Water Based Drilling Fluid for Enhanced-Performance Fluid-Loss-Control
by: ., Ali Samer Muhsan, Norani M Mohamed, Usman Siddiqui, Muhammad U S
Published: (2017)

Flow properties of Cu/CNTs feedstocks
by: ., Ali Samer Muhsan, Faiz Ahmad, M Rafi Raza
Published: (2011)

Development of nanocomposites heat sink (MWCNTs/Cu) using powder injection moulding for electronic applications
by: ., Ali S Muhsan, Faiz Ahmad
Published: (2011)

Developments of Al-12Si alloys by reinforcing TiN particles
by: ., Malek Ali, Ali Samer Muhsan, MI Fadhel, MA Alghoul, K Sopian, A
Published: (2012)

Homogeneous Distribution of Carbon Nanotubes in Copper Matrix Nanocomposites Fabricated via Combined Technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M. Mohamed, Puteri Sri Melo
Published: (2014)

THERMAL CONDUCTIVITY OF POWDER INJECTION MOLDED CARBON NANOTUBE-REINFORCED COPPER-MATRIX COMPOSITES
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2015)

Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2014)

Uniform dispersion of multiwalled carbon nanotubes in copper matrix nanocomposites using metal injection molding technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2013)

Fabrication and Microstructural Analysis of CNTs Reinforced Copper Matrix Nanocomposites via MIM Technique
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, M Rafi Raza
Published: (2013)

EFFECTS OF SINTERING PARAMETERS ON THE MICROSTRUCTURAL CHARACTERISTICS OF CU/CNTS NANOCOMPOSITES
by: Ali Samer Muhsan, Norani M Mohamed, Faiz Ahmad, Thar M Badri Alb,
Published: (2016)

Experimental Preparation and Numerical Simulation of High Thermal Conductive Cu/CNTs Nanocomposites
by: ., Ali Samer Muhsan, Faiz Ahmad, Norani M Mohamed, Puteri Sri Melor
Published: (2014)

PREPARATION AND FIBER FRACTURE OF METAL MATRIX COMPOSITE FEED-STOCK FOR POWDER INJECTION MOLDING.
by: ., Faiz Ahmad, Muhammad Rafi Raza, Ali Samer Muhsan, Mohd Afian Ome
Published: (2013)

Study on Stress Concentration Factor (SCF) of Gap and Overlap Tubular K-Joint
by: Md Shamir, Nurul Izzati
Published: (2019)

Strength prediction of Class G oilwell cement during early ages by electrical conductivity
by: Ridha, Syahrir, et al.
Published: (2013)

$Dynamic Responses of Classic Spar Platforms Subjected to Long Crested Waves: Morison Equation vs. Diffraction Theory$

Dynamic Responses of Classic Spar Platforms Subjected to Long Crested Waves: Morison Equation vs. Diffraction Theory
by: Kurian, V.J., et al.
Published: (2012)

Flow behavior of Cu/CNTs feedstocks for powder injection molding
by: ., li Samer Muhsan, Faiz Ahmad, Norani Muti Mohamed, M Rafi Raza
Published: (2011)

A Quantification of Causality between the Construction and Agriculture Sectors of Malaysia (2000-2010)
by: Raza, Ali Khan, et al.
Published: (2013)

Experimental Investigation of Corbel between ECC and HPFRC
by: Wan Adnan, Wan Norsyahida
Published: (2019)

RELIABILITY ASSESSMENT OF HORIZONTAL WELL SYSTEM SUBJECTED TO BURST AND COLLAPSE PRESSURE
by: ABDUL HALIM, AMIRAH HUSNA
Published: (2019)

Experimental Evaluation of Hydraulic Performance of Geotextile Breakwater Subjected to Regular and Random Waves
by: BALDEV RAJ, SHADANA GUPTA
Published: (2019)

Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles
by: ., Ali Samer, Malek Ali, Projjal Basu, Faiz Ahmad
Published: (2013)

An Empirical Assessment of Linkage between the Construction Sector and Economic Growth (GDP) of Malaysia (2000-2010)
by: Raza, Ali Khan, et al.
Published: (2012)

Compressive Strength of Engineered Cementitious Composite (ECC) Incorporating Crumb Rubber and Nano-Silica Subjected to High Temperature
by: Abdul Kahar, Nursyafiqah
Published: (2019)

An Empirical Formulation for Predicting the Ultimate Strength of Unstiffened Curved Plates Subjected to Longitudinal Compression
by: Ming King, Andy Wong
Published: (2019)

BEHAVIOURAL STUDY OF UNRESTRAINED THREE-SIDED PROTECTED STEEL BEAM SUBJECTED TO HYDROCARBON FIRE
by: IMRAN, MUHAMMAD
Published: (2019)

MECHANICAL PROPERTIES OF HYBRID FIBER REINFORCED REACTIVE POWDER CONCRETE
by: Awadh Ba Dhib, Mohammed Ali
Published: (2016)

COMPARISON BETWEEN GREEN’S FUNCTION AND FINITE ELEMENT FORMULATION FOR THE LINEAR DYNAMIC OF PIPELINE CONVEYING FLUID ON WINKLER FOUNDATION
by: FONG, KAH SOON
Published: (2019)

Developing a Spatial Decision Support System (SDSS) to evaluate the correlation between flood susceptibility of real estate locations and prices of real estates
by: Sheng, Tan Yong
Published: (2019)

Carbon Nanotubes Reinforced Copper Matrix Nanocomposites via Metal Injection Molding Technique
by: ., Ali S Muhsan, Faiz Ahmad, Norani M Mohamed, Putri SMBTM Yusoff,
Published: (2012)

Development of defects free stainless steel parts using powder injection molding
by: Muhammad Rafi Raza, Faiz Ahmad, M.A Omar, Ali S. Muhsan,
Published: (2017)

Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites
by: ., Faiz Ahmad, Muhammad Aslam, M Rafi Raza, Ali S Muhsan
Published: (2014)

A FRAMEWORK FOR FATIGUE ASSESSMENT OF STEEL TRUSS BRIDGES
by: AYILARA, AJIBOLA QUADRI
Published: (2016)

DEVELOPMENT OF HYBRID FIBRE REINFORCED RUBBERIZED CEMENTITIOUS COMPOSITE (HFRRCC)
by: KHED, VEERENDRAKUMAR C
Published: (2019)

NUMERICAL STUDIES ON THE GAP RESONANCE OF FPSO AND SHUTTLE TANK SIDE BY SIDE DUE TO OCEAN EXCITING WAVES
by: ABD JALIL, MUHAMMAD NURTASLIM
Published: (2017)

Experimental Study of High-Performance Concrete Corbels with Hybrid Fiber Reinforced Concrete (HyFRC)
by: Nazir, Nazihah Shahirah
Published: (2019)

Role of debinding to control mechanical properties of powder injection molded 316L stainless steel
by: ., Muhammad Rafi Raza, Faiz Ahmad, MA Omar, RM German, Ali S Muhsan
Published: (2013)

Defect Analysis of 316LSS during the Powder Injection Moulding Process
by: ., M Rafi Raza, Faiz Ahmad, MA Omar, RM German, Ali S Muhsan
Published: (2012)

Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding
by: ., Irfan Shirazi, Faiz Ahmad, M Rafi Raza, Ali S Muhsan, M Aslam
Published: (2015)